Texan .457 / .50 Carbon Fiber Spare Tank

Texan .457/.50 Carbon Fiber Spare Tank: Double Your Big Bore Air with Lighter Weight

The Texan .457/.50 Carbon Fiber Spare Tank is a genuine AirForce air cylinder built for the most powerful Texan configurations. If you have searched for a Texan .457.50 carbon fiber spare tank price, this accessory delivers 500cc of air capacity at a maximum fill pressure of 3625 PSI (250 BAR) . Consequently, it suits big bore hunters across Sweden, Finland, Estonia, and other EU countries where high-power PCP rifles are permitted. Moreover, the carbon fibre construction weighs roughly half a pound less than the aluminium alternative, improving balance on an already hefty rifle . Because the higher 250 BAR fill pressure unlocks the Texan CF Series’ full potential, exceeding 700 foot-pounds in .457 and 800 foot-pounds in .50 calibre . Therefore, whether you are checking Texan .457.50 carbon fiber spare tank in stock or comparing it against the aluminium version, this genuine AirForce part deserves serious consideration.

Texan .457/.50 Carbon Fiber Spare Tank Specifications: Capacity, Fill Pressure, and European Availability

The carbon fibre spare tank holds 500cc of compressed air or dry nitrogen only . The maximum fill pressure reaches 3625 PSI (250 BAR), a significant increase over the aluminium tank’s 3000 PSI limit . This spare tank fits .457 and .50 calibre Texan, TexanLSS, Texan Carbine, and TexanSS CF Series rifles . Airgun Armoury lists this tank among its Air Charging accessories, confirming European availability . Therefore, shooters in Sweden, Finland, and Estonia should verify their Texan model and calibre before ordering.

Carbon Fibre Construction and 250 BAR Performance Advantages

The defining feature of this spare tank is its carbon fibre construction. The shift from aluminium to carbon fibre delivers a meaningful increase in power and consistency, with the .457 Texan jumping from roughly 600+ foot-pounds to over 700 foot-pounds, and the .50 exceeding 800 foot-pounds . Moreover, the lighter weight of carbon fibre improves the rifle’s handling compared to the aluminium tank it replaces . The 500cc capacity provides approximately four to six full-power shots per fill depending on projectile weight and power setting, mirroring what owners report from the complete rifle . Consequently, the spare tank delivers both weight savings and maximum energy potential.

Known Texan Carbon Fiber Spare Tank Problems Owners Report

Owners report several significant considerations worth knowing. Valve and tank assembly issues are the most serious complaint, with one owner reporting their carbon fibre tank was “mis assembled and the valve was not attached to the tank” upon receipt, though AirForce replaced it promptly . Another owner reported their tank “was broke and rattling inside” after nine shots, requiring a full return and replacement under warranty . The TX2 valve has caused dangerous full tank dumps on some units, with one owner reporting the tank “totally dumped down to 0 psi” and driving the scope back into their face . Therefore, owner feedback strongly suggests inspecting the tank and valve assembly immediately upon receipt and testing function before field use.

Accuracy, Ammunition Choice, and Range Performance

The spare tank does not directly affect accuracy through ammunition choice, as it serves as an air reservoir. However, the 250 BAR fill pressure supports the velocities needed for stable flight with heavy slugs, with the Texan CF Series pushing up to 1100 FPS depending on configuration . Owners report excellent accuracy with cast bullets, with one shooter achieving 1.5-inch groups at 50 yards using wheel weight cast bullets sized to .457 . Moreover, carrying a pre-filled spare tank means you avoid mid-session pressure drops that alter velocity and point of impact. Consequently, the spare tank supports consistent downrange performance by maintaining stable air supply. Shooters report that refilling to between 3200 and 3500 PSI between shots mimics first-round field performance .

FINAL VERDICT

The Texan .457/.50 Carbon Fiber Spare Tank represents a worthwhile investment for big bore hunters wanting maximum energy and lighter weight. It offers 500cc capacity, 3625 PSI fills, and carbon fibre construction that unlocks the Texan CF Series’ full power potential . However, documented valve assembly failures and full tank dumps mean it suits shooters willing to inspect their equipment thoroughly and test function before field use. Purchase from a reputable European retailer with warranty support and knowledge of local regulations. Consider adding a DonnyFL Emperor moderator to tame the report, and verify your Texan’s valve system accepts the TX2 tank assembly . Therefore, confirm your Texan model, calibre, and valve compatibility before ordering, as regulations on high-power airguns vary across EU member states including Sweden, Finland, and Estonia. Shop at Airgun Armoury.